Second Generation GM small block V8 - Revision history

Sadida011: /* LT5 */

2008-06-29T15:55:00Z

LT5

← Older revision		Revision as of 15:55, 29 June 2008
Line 41:		Line 41:

	== LT5 ==		== LT5 ==

			http://www.zr1netregistry.com/LT5no1.jpg

	Immediately prior to the release of the second generation Small-Block, General Motors released a largely unrelated engine which also used the LT name. The LT5 was a special engine indeed. Head Engineer, Terry D. Stinson, led the project. It was an all-aluminum 349 in³ (5.7 L) small-block V8, but was entirely different from any of the other Chevrolet 350 engines. The bore and stroke were both different at 3.9 by 3.66 in (99 by 93 mm) instead of the usual 4 by 3.48 in (102 by 88 mm) and it featured Lotus-designed 32-valve DOHC heads. It was hand built by specialty engine builder, Mercury Marine. This engine produced 375 hp (280 kW) and 370 ft·lbf (502 Nm) for the 1990-1992 Corvette ZR-1 and jumped to 405 hp (302 kW) and 385 ft·lbf (522 Nm) for 1993 to its final year in 1995, thanks to cam timing changes and improvements to the engine porting. 1993 also added 4-bolt main bearing caps and an exhaust gas recirculation system. The engine was not used in any other vehicle.		Immediately prior to the release of the second generation Small-Block, General Motors released a largely unrelated engine which also used the LT name. The LT5 was a special engine indeed. Head Engineer, Terry D. Stinson, led the project. It was an all-aluminum 349 in³ (5.7 L) small-block V8, but was entirely different from any of the other Chevrolet 350 engines. The bore and stroke were both different at 3.9 by 3.66 in (99 by 93 mm) instead of the usual 4 by 3.48 in (102 by 88 mm) and it featured Lotus-designed 32-valve DOHC heads. It was hand built by specialty engine builder, Mercury Marine. This engine produced 375 hp (280 kW) and 370 ft·lbf (502 Nm) for the 1990-1992 Corvette ZR-1 and jumped to 405 hp (302 kW) and 385 ft·lbf (522 Nm) for 1993 to its final year in 1995, thanks to cam timing changes and improvements to the engine porting. 1993 also added 4-bolt main bearing caps and an exhaust gas recirculation system. The engine was not used in any other vehicle.

Sadida011: /* LT4 */

2008-06-29T15:52:58Z

LT4

← Older revision		Revision as of 15:52, 29 June 2008
Line 28:		Line 28:

	== LT4 ==		== LT4 ==

			http://www.projectlt10.com/images/lt1vs4/throttle_body-587.jpg

	The [[LT4]] was a special high-performance version of the new-generation LT1. With the addition of a slightly more aggressive camshaft profile, 1.6:1 full roller bearing Aluminum rocker arms and better-flowing intake manifold (painted red) and cylinder heads, it was specified to produce 330 hp (243 kW) and 340 lb·ft (461 N·m). (459 Nm) of torque (although these numbers were likely underrated in order to "protect" the upcoming LS1's power rating). It was introduced in the 1996 model year, for the last year of the C4 Corvette, and came standard on all manual transmission (ZF 6-speed equipped) C4 Corvettes. The engine was passed down to special versions of the Camaro and Firebird the next model year.		The [[LT4]] was a special high-performance version of the new-generation LT1. With the addition of a slightly more aggressive camshaft profile, 1.6:1 full roller bearing Aluminum rocker arms and better-flowing intake manifold (painted red) and cylinder heads, it was specified to produce 330 hp (243 kW) and 340 lb·ft (461 N·m). (459 Nm) of torque (although these numbers were likely underrated in order to "protect" the upcoming LS1's power rating). It was introduced in the 1996 model year, for the last year of the C4 Corvette, and came standard on all manual transmission (ZF 6-speed equipped) C4 Corvettes. The engine was passed down to special versions of the Camaro and Firebird the next model year.

Sadida011: /* LT1 */

2008-06-29T15:51:26Z

LT1

← Older revision		Revision as of 15:51, 29 June 2008
Line 3:		Line 3:
	== LT1 ==		== LT1 ==
	In 1992, GM created a new-generation small-block engine called the LT1, recalling the 1970 LT-1 moniker. It displaced 5.7 liters and was a 2-valve pushrod design. The LT1 used a reverse-flow cooling system which cooled the cylinder heads first, maintaining lower cylinder temperatures and allowing the engine to run at a higher compression than its immediate predecessors.		In 1992, GM created a new-generation small-block engine called the LT1, recalling the 1970 LT-1 moniker. It displaced 5.7 liters and was a 2-valve pushrod design. The LT1 used a reverse-flow cooling system which cooled the cylinder heads first, maintaining lower cylinder temperatures and allowing the engine to run at a higher compression than its immediate predecessors.

			http://www.basicpower.com/images/57L_gen_II_LT1.jpg

	This engine was used in:		This engine was used in:

DeuceGI: /* LT4 */

2008-06-29T12:27:00Z

LT4

← Older revision		Revision as of 12:27, 29 June 2008
Line 26:		Line 26:

	== LT4 ==		== LT4 ==
	The LT4 was a special high-performance version of the new-generation LT1. With the addition of a slightly more aggressive camshaft profile, 1.6:1 full roller bearing Aluminum rocker arms and better-flowing intake manifold (painted red) and cylinder heads, it was specified to produce 330 hp (243 kW) and 340 lb·ft (461 N·m). (459 Nm) of torque (although these numbers were likely underrated in order to "protect" the upcoming LS1's power rating). It was introduced in the 1996 model year, for the last year of the C4 Corvette, and came standard on all manual transmission (ZF 6-speed equipped) C4 Corvettes. The engine was passed down to special versions of the Camaro and Firebird the next model year.		The [[LT4]] was a special high-performance version of the new-generation LT1. With the addition of a slightly more aggressive camshaft profile, 1.6:1 full roller bearing Aluminum rocker arms and better-flowing intake manifold (painted red) and cylinder heads, it was specified to produce 330 hp (243 kW) and 340 lb·ft (461 N·m). (459 Nm) of torque (although these numbers were likely underrated in order to "protect" the upcoming LS1's power rating). It was introduced in the 1996 model year, for the last year of the C4 Corvette, and came standard on all manual transmission (ZF 6-speed equipped) C4 Corvettes. The engine was passed down to special versions of the Camaro and Firebird the next model year.

	The LT4 was available on the following vehicles:		The LT4 was available on the following vehicles:

DrJsl2008: /* LT5 */

2008-05-12T19:53:49Z

LT5

← Older revision		Revision as of 19:53, 12 May 2008
Line 37:		Line 37:
	== LT5 ==		== LT5 ==

	The [[LT5 engine]] was ~~a [[Dual Overhead Cam\|DOHC]]~~ 5.7L V8 ~~designed~~ by Lotus. It ~~is not technically a member of this~~ engine ~~family~~, ~~but it is included here because it was current at~~ the ~~same time~~ and ~~because~~ its ~~[[RPO Code\|RPO]] designation leads many people~~ to ~~believe that it is related~~.		Immediately prior to the release of the second generation Small-Block, General Motors released a largely unrelated engine which also used the LT name. The LT5 was a special engine indeed. Head Engineer, Terry D. Stinson, led the project. It was an all-aluminum 349 in³ (5.7 L) small-block V8, but was entirely different from any of the other Chevrolet 350 engines. The bore and stroke were both different at 3.9 by 3.66 in (99 by 93 mm) instead of the usual 4 by 3.48 in (102 by 88 mm) and it featured Lotus-designed 32-valve DOHC heads. It was hand built by specialty engine builder, Mercury Marine. This engine produced 375 hp (280 kW) and 370 ft·lbf (502 Nm) for the 1990-1992 Corvette ZR-1 and jumped to 405 hp (302 kW) and 385 ft·lbf (522 Nm) for 1993 to its final year in 1995, thanks to cam timing changes and improvements to the engine porting. 1993 also added 4-bolt main bearing caps and an exhaust gas recirculation system. The engine was not used in any other vehicle.

DrJsl2008: /* LT4 */

2008-05-12T19:53:03Z

LT4

← Older revision		Revision as of 19:53, 12 May 2008
Line 26:		Line 26:

	== LT4 ==		== LT4 ==
			The LT4 was a special high-performance version of the new-generation LT1. With the addition of a slightly more aggressive camshaft profile, 1.6:1 full roller bearing Aluminum rocker arms and better-flowing intake manifold (painted red) and cylinder heads, it was specified to produce 330 hp (243 kW) and 340 lb·ft (461 N·m). (459 Nm) of torque (although these numbers were likely underrated in order to "protect" the upcoming LS1's power rating). It was introduced in the 1996 model year, for the last year of the C4 Corvette, and came standard on all manual transmission (ZF 6-speed equipped) C4 Corvettes. The engine was passed down to special versions of the Camaro and Firebird the next model year.

			The LT4 was available on the following vehicles:

			1996 Chevrolet Corvette when equipped with 6-speed manual transmission (includes all Grand Sports) (Production: 6,359)
			1997 Chevrolet Camaro SLP/LT4 SS 6-speed (Production: 100 for the U.S. and 6 for Canada)
			1997 Pontiac Firebird SLP/LT4 Firehawk 6-speed (Production: 29)
			All 135 production engines for the Firehawks and Camaro SS were completely disassembled, balanced, blueprinted and honed with stress plates. One in 5 engines was tested on a Superflow engine dyno and every car was tested on a chassis dyno in addition to performing a short 6-mile (10 km) road test.

	== LT5 ==		== LT5 ==

	The [[LT5 engine]] was a [[Dual Overhead Cam\|DOHC]] 5.7L V8 designed by Lotus. It is not technically a member of this engine family, but it is included here because it was current at the same time and because its [[RPO Code\|RPO]] designation leads many people to believe that it is related.		The [[LT5 engine]] was a [[Dual Overhead Cam\|DOHC]] 5.7L V8 designed by Lotus. It is not technically a member of this engine family, but it is included here because it was current at the same time and because its [[RPO Code\|RPO]] designation leads many people to believe that it is related.

DrJsl2008: /* LT1 */

2008-05-12T19:52:32Z

LT1

← Older revision		Revision as of 19:52, 12 May 2008
Line 2:		Line 2:

	== LT1 ==		== LT1 ==
			In 1992, GM created a new-generation small-block engine called the LT1, recalling the 1970 LT-1 moniker. It displaced 5.7 liters and was a 2-valve pushrod design. The LT1 used a reverse-flow cooling system which cooled the cylinder heads first, maintaining lower cylinder temperatures and allowing the engine to run at a higher compression than its immediate predecessors.

			This engine was used in:

			1992-1996 Chevrolet Corvette C4
			1993-1997 Chevrolet Camaro Z28
			1993-1997 Pontiac Firebird Formula and Trans Am
			1994-1996 Buick Roadmaster
			1994-1996 Cadillac Fleetwood
			1994-1996 Chevrolet Caprice
			1994-1996 Chevrolet Caprice Police Package
			1994-1996 Chevrolet Impala SS
			1994-1996 Chevrolet Caprice Wagon
			1994-1996 Buick Roadmaster Wagon

			There were a few different versions of the LT1. All feature a cast iron block, with aluminum heads in the Y and F bodies, and cast iron heads in the B and D bodies. Corvette blocks had four-bolt mains, while most other blocks were two-bolt mains.

			The 92-93 LT1s used speed density fuel management, batch-fire fuel injection and a dedicated engine control module (ECM). In 94 the LT1 switched to a mass airflow sensor and sequential port injection. A new, more capable computer controlled the transmission as well as the engine and got a new name: powertrain control module (PCM). Where the ECM held its calibration information in a replaceable "chip", the PCM was reprogrammable through the diagnostic port.

			The early Opti-spark distributor had durability problems and a revised version was introduced on the 1994 B-Bodies and in 1995 on the Y and F-Bodies. 1996 saw major revisions for OBD-II - a second catalytic converter on the F-body cars (which was standard since 1995 in California), rear oxygen sensors to monitor catalyst efficiency and a crank position sensor for misfire detection. Some OBD-II features had been added to the Corvette starting in 1994 for testing purposes. The 1997 model year Camaro and Firebird were the last year for this engine in a GM production car.

			The 1992 LT1 in the Y-body was factory rated at 300 hp (220 kW) and 330 lb·ft (447 N·m). 96 LT1 Y-bodies were rated at 300 hp (220 kW) and 340 lb·ft (461 N·m). The 93-95 F-bodies were rated at 275 hp (202 kW) and 325 ft·lbf (439 Nm), while the 96-97 cars were rated at 285 hp (210 kW) and 335 ft·lbf (452 Nm). The 96-97 WS6 F-bodies were rated at 305 hp (227 kW). The 94-96 B and D-body version was rated at 260 hp (191 kW) and 330 ft·lbf (446 Nm).

	== LT4 ==		== LT4 ==

JakeRobb at 19:41, 2 January 2008

2008-01-02T19:41:25Z

← Older revision		Revision as of 19:41, 2 January 2008
Line 1:		Line 1:
	This article is a stub. ~~Information about the~~ LT1 ~~and~~ LT4 ~~engines should be added here~~. ~~A brief mention~~ of ~~the LT5 is appropriate~~, but ~~since~~ it was ~~technically an entirely different engine,~~ it ~~should have its own page~~.		This article is a stub.

			== LT1 ==


			== LT4 ==


			== LT5 ==

			The [[LT5 engine]] was a [[Dual Overhead Cam\|DOHC]] 5.7L V8 designed by Lotus. It is not technically a member of this engine family, but it is included here because it was current at the same time and because its [[RPO Code\|RPO]] designation leads many people to believe that it is related.

JakeRobb at 18:55, 2 January 2008

2008-01-02T18:55:20Z

New page

This article is a stub. Information about the LT1 and LT4 engines should be added here. A brief mention of the LT5 is appropriate, but since it was technically an entirely different engine, it should have its own page.